Skip to main content
Skip to main content

Technology Enhanced Classrooms

Information Technology Services

Using the LOGITECH Cordless 2.4 GHz Presenter

LOGITECH Cordless 2.4 GHz Presenter

  1. ON/OFF Switch

  2. Volume Control
    • Press (+) to increase or (-) to decrease the system volume.

  3. Forward Button
    • Press to advance to the next slide.

  4. Backward Button
    • Press to go back to the previous slide.

  5. Laser Pointer Button
    • As with all Laser products do not direct near or into eyes or stare into beam.

  6. Launch Slide Show
    • Press to start PowerPoint slide show.

  7. Black Screen ON/OFF
    • Press to pause the presentation and bring up a black screen.

  8. LCD
    • Shows timer and battery Status Indicator. For more information see below.

  9. Timer Set Button
    • Press to set the timer feature of the Presenter. For more information see below.

  10. Reset Button
    • Press to reset the connection between the presenter and the computer. Only needs to be pressed when performing initial installation procedures by TECS Technicians.



Using the Timer Set Button

LOGITECH Cordless 2.4 GHz Presenter

  1. Press the Timer Set button to activate timer on display screen. LCD will flash for 5 seconds, and will go off if Set button is not pressed again. Holding down the Set button for more than two seconds will reset the timer to 0:00.
  2. Each press of the Set button adds 5 minutes to the timer. Display will flash on screen while time is added.
  3. Five seconds after the time is added the display will stop flashing and the countdown begins.
  4. During the countdown pressing the Set button adds more time.
  5. With five minutes remaining, the timer flashes for five seconds and the Presenter vibrates briefly. The same warning will be repeated with two minutes to go. When time runs out, the Presenter vibrates twice, and 0:00 flashes for five seconds before the display goes blank.
  6. Flashing low batteries icon, please change batteries.

Presenter Display Window

LOGITECH Cordless 2.4 GHz Presenter

  1. Full Charge.
  2. Batteries are low.
  3. Flashing low batteries icon, please change batteries.